How To Add A Device To My Iphone Bluetooth

Download Article

This wikiHow teaches you how to connect your Bluetooth headset, speaker, wearable, or any other accessory with your iPhone. You'll also learn some simple troubleshooting tips in case something doesn't go as planned.

1
Turn on the Bluetooth accessory. Make sure your Bluetooth accessory is fully charged and turned on before attempting to pair. Depending on the accessory, you may have to press a button or activate a switch to power it on.
- Make sure your Bluetooth accessory and the iPhone are within close range. The range may vary by accessory, but no more than 30 feet apart is recommended.^[1]
2
Put the accessory into pairing mode. The accessory must be in pairing mode so that your iPhone can detect it. Some accessories automatically go into pairing mode when turned on, while others require you to press a button or select an option from a menu. You can usually figure out if an accessory is in pairing mode by checking the behavior of an LED light. For example, sometimes a light will blink on a device when it's ready for pairing.
- If you're not sure how to enable pairing mode, check the device's manual.
- "Pairing mode" is sometimes referred to "discover mode" or "making the device discoverable."
Advertisement
3

Open your iPhone's Control Center. If you're using an iPhone X or later, swipe down from the top-right corner of the home screen.^[2] On earlier iPhones, swipe up from the bottom of the home screen.
4

Tap and hold the Bluetooth icon . A pop-up screen with more icons will appear.
5
Tap Bluetooth to turn it on (if it's off). If you see the word "Off" below the "Bluetooth" icon, tap the icon once to turn it on. Bluetooth is enabled once the icon turns blue.
- If you don't see this option, you may be using an older version of iOS. To pair your accessory, open the Settings, select Bluetooth option, and slide the "Bluetooth" switch to the On (green position). Then, skip to Step 7.
6

Tap and hold the Bluetooth icon . This time, your iPhone will scan for nearby accessories in pairing mode and display them in a list.
7
Tap your accessory's name to start pairing. If a pairing password is not required, you should be able to start using your Bluetooth accessory with the iPhone immediately. If you are prompted to enter a password, the password may be in your accessory's manual (or on its screen, if there is one). Common factory-generated passwords include 0000, 1111, and 1234. If you can't find a password, try one of these.
- Now that the accessory is paired, it will always appear as a pairing option in your Bluetooth settings. You will not have to go through the process of pairing the two again unless you tell your iPhone to unpair or "forget" the accessory.
- Keep the accessory in range of your iPhone when in use. You'll need to stay within range to maintain the connection.
Advertisement

1

Restart the Bluetooth accessory. If the accessory doesn't show up as an pairing option, it may be because it's no longer in pairing mode. Sometimes the accessory will automatically turn off if it takes too long to pair with your iPhone. Try restarting the accessory and putting it back into pairing mode.
2
Unpair the Bluetooth device and reconnect. If you can see the accessory as an option on your iPhone but can't get the accessory to work, you can make your iPhone "forget" the accessory so you can pair it again. To do this:^[3]
- Open your iPhone's Settings.
- Tap Bluetooth.
- Tap the blue "i" in a circle next to the accessory's name.
- Tap Forget This Device.
- Tap the back button.
- Restart the accessory and put it into pairing mode.
- Select the accessory on your iPhone to pair with it.
3

Restart Bluetooth on your iPhone. On the other hand, your iPhone may be the reason why you cannot pair with the Bluetooth device. Open the Control Center and tap the Bluetooth icon to turn Bluetooth off, and then again to turn it back on. If that doesn't help, try restarting your iPhone and then attempting to pair again.
4

Upgrade to the latest version of iOS. If you haven't updated your iPhone's operating system in a while, you may need to do so to use the accessory you're trying to pair with. Plug your iPhone into a power source, connect to Wi-Fi, and then check out How to Update iOS to proceed.

Advertisement

Add New Question

Question

Can I use Bluetooth for transferring songs or images?

Yes, but you can only transfer songs or images between two iPhones. If you want to transfer files between an iPhone and an Android, you will need to download some apps to help you transfer the files.
Question

What do I do if it says connection unsuccessful?

Make sure airplane mode is turned off and that the Wi-Fi is on. Wait a few minutes and try pairing it again. Don't keep pushing the button for that will mess it up and might make it load longer.
Question

How do I disengage my phone ringer/text when using Bluetooth speakers?

Use Do not Disturb (the Moon icon in the swipe-up Control Center).
Question

My iPhone 5S connects to the car, but the phone book display has stopped showing. My wife's 4S still works, so I know the car system is okay. What settings on the 5S do I need to adjust to make it display properly?

You need to go to the menu and reconnect with bluetooth. Press the name of the device, and switch the switches in the menu on your phone.
Question

What should I do if my speaker disconnects from my iPhone when I walk away?

Bluetooth can only operate when the phone is in a certain range of the device. The best thing to do is to leave your phone in the room or close to the speaker; otherwise, the device will not pick up your phone's bluetooth.
Question

My wireless headset paired beautifully with my iPhone and then just disappeared. Now the headphones won't pair. What should I do?

Turn off both devices. Or, simply read the directions to the pairing button for the headset.
Question

Why does my phone never find my car's Bluetooth to connect after I told my iPhone to forget the device? I have tried to reset and nothing has worked.

Your phone's Bluetooth signal goes into a standby mode after a few minutes of no activity. Try to reset or turn it off, and then turn on both Bluetooth signals at the same time, look for your vehicle's signal in your phone, and pair it. This should work. Make sure the Bluetooth function is enabled on both.
Question

Why isn't my iPhone finding my TDK A33 speaker?

Turn your Bluetooth off and on again on your iPhone. When you turn on the speaker, it should beep once and pop up on nearby Bluetooth connections. Press connect, and job done.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Thanks for submitting a tip for review!

About This Article

Article SummaryX

1. Put the accessory into pairing mode.
2. Open the iPhone's Control Center.
3. Tap and hold Bluetooth.
4. Turn on Bluetooth.
5. Tap and hold Bluetooth again.
6. Select the Bluetooth accessory.

Did this summary help you?

Thanks to all authors for creating a page that has been read 925,606 times.